https://unstoppableswap.net/ / https://github.com/UnstoppableSwap/core makers (i do not mean a SW developers, but swap providers) seems to have swap markup (assuming a fee) of around 3% which is too expensive and along with the limits on amount of traded coin pretty unusable IMO. Am I missing any makers or source for it which allows near zero fees/markup? Why such makers are not available (by default)?

I am currently using RetoSwap https://github.com/retoaccess1/haveno-reto which allowed me to place and complete the BTC and ETH exchange to XMR at 0% fee. (only paying regular Monero tx fee for a temporary custody)

How to setup an UnstoppableSwap maker? Is it this https://github.com/UnstoppableSwap/core/blob/master/dev-docs/asb/README.md . I do not see any easy to understand tutorial for layman which would tell me the requirements (evaluate the cost) + be easily understandable.

cross-posted from: https://lemmings.world/post/12787893

1. SEPARATE MONERO ACCOUNTS - For privacy reason, organize own funds into accounts like “cash”, “work”, “trading”, “mining”, “donations”, etc.. And in order to later combine these individual accounts funds, sweep/withdraw each of the account balance the way, that you do NOT sweep/withdraw multiple accounts balances in a single transaction, but one transaction per account. Feather wallet may do this thanks to its "Coin control" functions? Source: https://getmonero.dev/public-address/subaddress.html ; https://docs.featherwallet.org/guides/features
2. WAIT/AGE XMR AFTER RECEIVING IT - After receiving Monero (XMR) from a 3rd party, wait some time (a few hours to a few days)
3. CHURN/MIX XMR BY SENDING IT TO OTHER OWN ACCOUNT - Churning/mixing means to send your Monero/XMR to a different account/wallet in order to make it harder for others to track you: "So after 1 churn, there is a 1 in 16 chance (6.25%) that this transaction is y

cross-posted from: https://lemmings.world/post/12787871

1. SEPARATE MONERO ACCOUNTS - For privacy reason, organize own funds into accounts like “cash”, “work”, “trading”, “mining”, “donations”, etc.. And in order to later combine these individual accounts funds, sweep/withdraw each of the account balance the way, that you do NOT sweep/withdraw multiple accounts balances in a single transaction, but one transaction per account. Feather wallet may do this thanks to its "Coin control" functions? Source: https://getmonero.dev/public-address/subaddress.html ; https://docs.featherwallet.org/guides/features
2. WAIT/AGE XMR AFTER RECEIVING IT - After receiving Monero (XMR) from a 3rd party, wait some time (a few hours to a few days)
3. CHURN/MIX XMR BY SENDING IT TO OTHER OWN ACCOUNT - Churning/mixing means to send your Monero/XMR to a different account/wallet in order to make it harder for others to track you: "So after 1 churn, there is a 1 in 16 chance (6.25%) that this tran

1. SEPARATE MONERO ACCOUNTS - For privacy reason, organize own funds into accounts like “cash”, “work”, “trading”, “mining”, “donations”, etc.. And in order to later combine these individual accounts funds, sweep/withdraw each of the account balance the way, that you do NOT sweep/withdraw multiple accounts balances in a single transaction, but one transaction per account. Feather wallet may do this thanks to its "Coin control" functions? Source: https://getmonero.dev/public-address/subaddress.html ; https://docs.featherwallet.org/guides/features
2. WAIT/AGE XMR AFTER RECEIVING IT - After receiving Monero (XMR) from a 3rd party, wait some time (a few hours to a few days)
3. CHURN/MIX XMR BY SENDING IT TO OTHER OWN ACCOUNT - Churning/mixing means to send your Monero/XMR to a different account/wallet in order to make it harder for others to track you: "So after 1 churn, there is a 1 in 16 chance (6.25%) that this transaction is yours. After 2 churns, it is a 1 in 16x16 = 1/256 = 0.39% c

On my desktop computer, I have tried to use Syncthing WebUI to add my remote headless server (no GUI/display, only CLI), which was established by just running ./syncthing command. I have got the ID from the CLI output.

Yet my WebUI tells me "connection refused" and "context deadline exceeded" and the headless server output shows "rejected: unknown device" next to my connection attempt.

In a "syncthing --help" output, I am unable to find any command which would add mine defined remote machine ID and allow its connections.

I have tried to access http://headless/ server IP:8384/ but it timeout. I am unable to find any firewall blocking, another service on a different port is accessible.

Any idea how to proceed interconnecting the two devices simplest way?

I have been told, that when entering foreign country address, I may be asked to verify passport details, I am unsure how it is when i enter russian address. I guess that when entering invalid address, I may be unable to claim my domain in case my domain registar bankrupt. Thank you in advance.

https://www.hosting.co.uk/register-domain/su-extension/ says:

.SU registry asks that companies provide a copy of the registering company's Certificate of Registration or an excerpt from the Commercial Register. Individuals are requested to provide their ID card or passport number.

https://manage.resellerclub.com/kb/answer/1336#heading_5 says:

For Individual: Registrant's Name (preferably in Russian); Passport Information: This needs to include the Document number, Issued by, Issued Date of the Passport. Birth Date: This needs to be entered as a numeric value in DD.MM.YYYY format.

https://wiki.hexonet.net/wiki/RU says:

for natural persons: passport copy (personal details and issuance data)

Hello, when I use following sqlite3 commands, it returns error "cannot commit - no transaction is active" somewhere near the line "WHERE user IN (".... So I wanted to ask what to replace with what in order not to produce said error. I am not a developer and the ChatGPT (1, 2) is unable to provide working code. Can you please help?

said commands:

 undefined

    
-- Start a transaction
BEGIN TRANSACTION;

-- Insert missing user_permission_overrides rows
INSERT INTO user_permission_overrides (room, user, write)
SELECT DISTINCT ru.room, u.id, TRUE
FROM room_users ru
JOIN users u ON ru.user = u.id
LEFT JOIN user_permission_overrides upo ON u.id = upo.user AND ru.room = upo.room
WHERE u.created < strftime('%s', '2024-07-02 00:49:26')
AND upo.user IS NULL;

-- Update existing user_permission_overrides rows
UPDATE user_permission_overrides
SET write = TRUE
WHERE user IN (
    SELECT id
    FROM users
    WHERE created < strftime('%s', '2024-07-02 00:49:26')

  

Kodi (20.1 (20.1.0) Git:20230316-d8f3f99cc3-dirty). Platform: Linux ARM 32-bit

was not responding after start and the Tvheadend shown no channels at http://192.168.0.2:9981/extjs.html (later I have found the disconnected antena cable).

cat /home/xbian/.kodi/temp/kodi.log (for other OS log paths check here) shown some warnings and errors, which I have all pasted here.

When i have pushed any button on the remote control (control worked and TV led indicated contact), there was no log entry added into a mentioned kodi log.

"dmesg -T" not shown any errors. After rebooting over SSH (reboot now), it started responding after boot (weird that not under first boot and second yes). But it got no reply from TVHeadend HTSP client (no signal, later I have found it is disconnected antena ;). When i went to this addon configuration, it freezed with followi

I see that the Solana blockchain explorers:

https://solanabeach.io/

https://explorer.solana.com/

https://solscan.io/

shows balance, transactions, individual stakes. Yet does not show total staked amount + total balance amount, ideally also in $.

Reposted from: https://lemmings.world/post/10865023

1. Recognize the common signs

• Urgent or emotionally appealing language • Requests to send personal or financial information • Unexpected attachments • Untrusted shortened URLs • Email addresses that do not match the supposed sender • Poor writing/misspellings (less common)

2. Resist and report Report suspicious messages by using the “report spam” feature. If the message is designed to resemble an organization you trust, report the message by alerting the organization using their contact information found on their webpage.

I have found also these phishing reporting pages:

SITE: https://safebrowsing.google.com/safebrowsing/report_phish/

SITE: https://www.ncsc.gov.uk/section/about-this-website/report-scam-website

SITE: https://www.scamwatcher.com/scam/add?type=fraudulent_website

SITE/EMAIL: https://report.netcraft.com/report ( scam [AT] netcraft [D0T] com - for a phi

If anyone wants to check, here is a video showing a Firefox dev. console (F12 key) and errors occured on https://www.openstreetmap.org/search?query=Oslo#map=8/59.973/10.723

I would like to find the causing extension without the need of disabling extensions randomly or by disabling half of extensions, then if issue solved, disable half of that half etc..

Sometimes it helps to hover over the link near the error on dev. console (F12 key), Console tab, to see the moz-extension://somestring and find first characters of the string at page about:debugging#/runtime/this-firefox Though this time, it does not show that IMO (per the linked video).

If I should click something particular in a FF dev. console (F12), please guide me. Thank you.

Hello,

Feather wallet Monero synchronization (that happens after startign the Feather wallet) which is not done over Tor is enough anonymous?

After removing all passwords under three dots/kebab menu in the top corner of the page "about:logins", i wanted to import passwords from a Proton Pass to see how it works. Yet there is no import menu entry. After researching, I have found a solution that I want to share:

go to "about:config" page, and search for "signon.management.page.fileImport.enabled". Set it to true by double clicking on "false". Reload "about:logins" page to see the import menu entry under three dots corner menu.

Reposted from: https://lemmings.world/post/10530999

Please what are the easiest and fastest steps in order to find backup of a currently unavailable post thanks to no longer running Lemmy instance?

Lets say it is this post we are reading, that become offline. I am not asking for the links to instances that hosts it, but for the way on how to discover all the instances myself.

So far I have found only this way:

1. open largest instances list: https://lemmyverse.net/?order=posts&open=true
2. open one after another and under magnifier button, search for the same post ID (number) as your dead link has

A quick look at the https://join-lemmy.org/docs/administration/federation_getting_started.html does not answer that question. Though at least ChatGPT has an opinion (which may be misleading) 😀

the probability of it (the post) being distributed on multiple instances depends on factors such as the popularity of the post, the number of upvotes and comments it receives, and how widely it is shared across different instances. Posts that generate a lot of engagement and discussion are more likely to be distributed on multiple instances, as they are more likely to be shared and reposted by users. Additionally, posts that are deemed relevant or controversial may also be more likely to be spread across multiple instances.

I am unsure what it means by shared (i assume just posting a link is not enough).

If that is true that reposted (often called cross-posted) post makes a fully "featured" copy/backup on a different Lemmy instance, is

Please what are the easiest and fastest steps in order to find backup of a currently unavailable post thanks to no longer running Lemmy instance?

Lets say it is this post we are reading, that become offline. I am not asking for the links to instances that hosts it, but for the way on how to discover all the instances myself.

So far I have found only this way:

1. open largest instances list: https://lemmyverse.net/?order=posts&open=true
2. open one after another and under magnifier button, search for the same post ID (number) as your dead link has. One can also search for the post title (while making sure that the search scope is everywhere, not local).

I have found around 20 search engine pages worth lemmings.world pages, where one search engine page is 10 results, so in total like 200 indexed subpages of the lemmings.world ?

https://www.ecosia.org/search?q=site%3Alemmings.world&p=19

https://duckduckgo.com/?hps=1&q=site%3Alemmings.world&ia=web

Is it too low or too much considering amount of content posted here?

While using Monero GUI wallet, I have been suggested to try Feather wallet instead. So this is what worked to reuse my existing Monero GUI wallet inside Feather app without loosing data and without need of a long synchronization.

I have tried to set I2P port (used by other I2P client app):

 undefined

    
- Qt: 6.7.0
SSL: OpenSSL 3.2.1 30 Jan 2024
SSL build: OpenSSL 3.2.1 30 Jan 2024
Tor version: 0.4.8.10
... D] (:0) wallet .keys search initiated
... D] (:0) "wallet .keys search completed in 2 ms"
... W] (:0) failed to create compose table
... W] (:0) Proxy:  "127.0.0.1"   1234
... D] (:0) WebSocket connect: "ws://longstringhere.b32.i2p/ws"
... D] (:0) WebSocket disconnected

  

after using default port suggested in the app (inside i2pd.conf described as "SOCKS proxy"), it started working:

 undefined

    
... D] (:0) WebSocket connect: "ws://longstringhere.b32.i2p/ws"
... D] (:0) WebSocket connected

  

then there were options (among other) to:

 undefined

    
Open wallet file
Restore wallet from keys

  

I have

On Monero GUI wallet connected over Tor proxy, it takes even tens of minutes if I launch Monero after a few weeks of inactivity. What is your Feather Wallet experience regarding this?