https://www.merriam-webster.com/word-of-the-day

Someone described as [word] shows a readiness or desire to fight or argue.

Feel free to try your hand at writing it in the comments!

https://www.merriam-webster.com/word-of-the-day

[Word] is an informal word that refers to the power or opportunity to choose—in other words, free choice. It is used especially in the phrase if one had one's [word].

Feel free to use this post to share your own take on the word of the day!

Hi there! Hopefully this is the right place. I tried searching for what this might be and I came up with a lot of different answers.

This is a store bought can of plain tomato sauce, we were making soup. We noticed this white paste on the side of the can, when I poked it it was soft, almost like a thin fat?

Smelled fine, and the sauce looked fine otherwise. But we got nervous and threw it away, afraid of botulism or other nasties. Plus we wanted to finish cooking.

Does anyone know what this is? Some sources said it might be calcium nitrate, but they also say it would be hard and wouldn't break up in your fingers if rolled. This was a paste.

Anyway, just wondering for next time, figured you guys would know. Thanks!

https://www.merriam-webster.com/word-of-the-day

This word is usually used with "about" or "of" to describe someone who is cautious about doing something.

https://www.merriam-webster.com/word-of-the-day

This is a formal and old-fashioned word meaning "to give (something) to someone as a promise or a privilege."

https://www.merriam-webster.com/word-of-the-day

This word is used disapprovingly to refer to a blindly devoted official, follower, or member of an organization, such as a corporation or political party.

https://www.merriam-webster.com/word-of-the-day

Something described this way is capable of being stretched or bent into different shapes, or capable of being easily changed or influenced.

Hi there! I've had this printer about a year now. I used to use my buddies og Ender 3, and when the V2 was on sale I "upgraded" and got my own.

I realize now that for just a bit more money I could've had a much more performant machine, but, oh well. I'm gonna use this for a good long while. I only print as an occasional hobby, or to augment my other hobbies.

Anywho, it's been on a shelf up and out of the way all winter, unused, in a climate controlled room.

I pulled it out the other day to do a few prints, it works great. Ran about 12 or 16 hours of prints through it. But today I noticed these cracks. This seems to be the belt tensioner for the bed? Did I have it too tight? Am I supposed to relax it while it's being stored?

I can probably print a replacement. But I was just wondering what your thoughts were.

Thanks!

A nugget of information for everyone, that I just learned this morning:

We all know that cats nails naturally shed, that's why they need a scratching post, to reveal the pointy new nail.

Well apparently, as cats age, their nails thicken, and it can get to the point where they stop shedding. And if you don't notice it, the nail will keep growing in a circle, until it stabs into their own paw meat. From what I read, this is extremely painful, because it just keeps digging deeper, and never stops.

You can prevent it by checking all your elderly cats nails every so often. Apparently they can become ingrown in as little as 3 months, if it's gonna happen.

Now my cat needs a vet appointment, because one of his nails did this, and it's too bad for me to safely fix. I think he'll need antibiotics.

We didn't see it because we usually only trim his front nails, not his front thumb(?) nails, or his backs. His backs are fine, but they will be getting checked going forward.

Mods, hopefull

Hi there, I've been meaning to go get more serious about my data. I have minimal backups, and some stuff is not backed up at all. I'm begging for disaster.

Here's what I've got: 2 8tb drives almost full in universal external enclosures A small formfactor PC as a server, with one 8tb drive connected. An unused raspberry pi. No knowledge of how to properly use zfs.

Here's what I want: I've decided I don't need raid. I don't want the extra cost of drives or electricity, and I don't need uptime. I just need backups. I want to use what drives I have, and an additional 16tb drive I'll buy.

My thought was that I would replace the 8tb drive with a 16tb one, format it with zfs (primarily to avoid bit rot. I'll need to learn how to check for this), then back it up across the two 8tb drives as a cold backup. Either as two separate drives somehow? Btrfs volume extension? Or a jbod connected to the raspberry pi, that I leave unplugged except for when it's time to sync the new data?

Or do

https://www.merriam-webster.com/word-of-the-day

This refers to a strong liking for something, or a strong tendency to behave in a certain way. It is usually used with for.

[email protected]

What is Elianscript? It's an alternative writing system whose properties combine the linearity of spelling with the free-form nature of drawing.

It's also kind of like a weak cipher, to those not in the know. Similar to a pigpen cipher, but instead of randomly jumbling the letters, we all agree to do it alphabetically. That way everyone IN the know, can read it. It's a lock to keep out honest people.

This is quite niche, and some might say it should be part of a larger cryptography community. But really it's more artistic than that, it's not meant to be jumbled or rearranged to make it more cryptic.

Anywho, I hope you'll enjoy it as much as I do!

https://www.merriam-webster.com/word-of-the-day

A member of a fictitious peaceful and friendly race of small humanlike creatures that dwell underground.

I also made it a different way:

Just want to add to the chorus, framework is awesome. This thing is so sleek and fancy.

There were a couple of hiccups with the DIY build. An out of position Wi-Fi wire on the hinge, and I wasn't told to plug it in before turning it on, so I thought I had a dud for a minute or two. But that's no big deal.

It was the deal that got me, I went with a 7840u, with the 2.8k screen. I bought my own ram, and reused a 2230 512gb nvme from when I upgraded my steam deck. That'll hold me over until I decide I need more 🤷‍♂️

It's only been a few days but so far I couldn't be happier!

Gotta stop myself from fidgeting with the bezel magnets, it's fun but I'm gonna break it 😬

Edit: Forgot to mention I'm running Bluefin, based on recommendations here. My first time with Fedora, and immutable/atomic based distros. I'm used to Debian based stuff. So far I haven't run into too much trouble. Though I AM struggling with my virtual machine.

I have three apps that I need Windows for still, ther

https://www.merriam-webster.com/word-of-the-day

To do this to something, such as a word, name, message, etc., is to cause it to be unclear or distorted. This type of thing can be the result of an accident, ignorance, or a transmission error. It can also mean "to so alter or distort as to create a wrong impression or change the meaning."

https://www.merriam-webster.com/word-of-the-day

It stops the second I unplug the fridge, and starts the moment I plug it back in.

Maybe my Google fu is weak, but I can't find many answers. It never used to do this. And at least for now, the temperature is fine 🤷‍♂️

https://www.merriam-webster.com/word-of-the-day

It is a formal adjective that describes something that relates to or occurs in the spring.

https://www.merriam-webster.com/word-of-the-day

This is something (such as a force, campaign, or movement) that is extremely large and powerful and cannot be stopped.