Skip Navigation
InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)KE
Posts
5
Comments
392
Joined
2 yr. ago
  • Granted I don't understand those people, but this difference between now and 2020 is lack of support for Harris, not increased support for Trump. I'll add people sitting at home to the list of people I don't want to associate with.

  • I recently learned that in my car the same light is used to indicate that the parking brake is on and that the brake fluid is low. Nothing bad happened, and it's getting worked on, but my first thought was that the sensor on the brake must be broken. It's poor design, seemingly without reason.

  • I have heard that the reason for this is that trucks in that size range are less regulated by the EPA. Companies didn't want to put in the research to develop trucks that met emissions standards, so they just make them really heavy for no purpose, evading regulations. Take this with a grain of salt, because I've done zero research of my own on it.

  • Colle

    The problem isn't that states have disproportionate power, and moreover the NPVC is a poor solution. The problem is that all but two states allocate their delegates in a winner-take-all manner, so that a candidate with only 51% of the vote gets all of the delegates.

    The NPVC requires huge buy in to work because in nearly half of cases it doesn't result it a person's voting power represening their actual vote. Thus, no individual citizen has incentive to support it. If it ever gets enough support to take effect, as soon as a state ends up with its delegates going to a candidate the citizens of that state didn't vote for, they'll repeal it and it will end nationally due to the wording of the law.

    The solution is for states to allocate delegates proportionally to the votes of its citizens. That's what voting is all about. If that system were in place, then there would have been no elections with a mismatch between the college and popular vote. Every citizen has individual incentive for that system, more so than the current system or NPVC, and therefore you don't need the group buy-in wording that the NPVC has. It can be achieved on a state-by-state basis, and it would only need a few states to operate this way to have an impact.

    Someone is going to point out that there are details and some states want to be fought over for their small percentage to swing the state, but the fact is that this solves the problem, and overwhelmingly this has fewer barriers and weakenesses than NPVC. If you care about this, contact your state government to change how delgates are allocated.

  • I think nitpicking the inconsistencies in a work of fiction is like going to a magic show and pointing out that it's not real. No one cares that the balrog had wings, or was divine or whatever contrivance people need to chew on until the story is tasteless. Suspend some disbelief, and just let the thing fall.

  • Apparently it's real for a lot of people judging by the number of down votes I got. They're upvoting this though, which I don't get. Perhaps they don't know that this meme is making fun of nerds who treat fiction like it's reality.

  • I have a fairly new, expensive (not $5000 expensive though) laptop from work. It's quite a high powered laptop. It's full of administration crap that constantly runs in the background using 8 GB of RAM and at least 20% of the CPU, nonstop. Daily I run out of RAM and it freezes. I have a 15 year old laptop that, without exaggeration, is faster to use and can run more programs without running out of RAM.

  • It also ignores that many of the the non-core policies of both major parties move toward the policies of the winning party. If Trump wins, support for Gaza in both parties will decrease. Not that there's never a reason to vote third party, but nothing about third party voting is advantageous for this particular issue.

  • What's this Bug? @lemmy.ml
    Kethal @lemmy.world

    Dobson fly?

    I'm not sure what this is, but my guess was a Dobson fly.

    What's this Bug? @lemmy.ml
    Kethal @lemmy.world

    What's going on with these bugs?

    It's a bit hard to make out in the photo, but there the center is a larger black insect being swarmed by dozens of small light brown ones. The larger one looks like some sort of beetle. What are the smaller ones?

    AutoHotkey @programming.dev
    Kethal @lemmy.world

    Does anyone use AHK with Adobe Acrobat Pro?

    Using Window Spy, Acrobat Pro doesn't appear to have button IDs to use with ControlClick. I can't find shortcut keys for almost any of the actions, and trying to navigate through the buttons with F6 and tab seems like a no-go too. The only ways I see to do this are to hardcode button positions or use or ImageSearch, both of which I find don't work well because coordinates change with window resizing or different resolution displays.

    Does anyone have a different approach or know of a way to handle different displays and window sizes? In particular, I want to activate "Visually digitally sign".

    Plumbing @lemmy.world
    Kethal @lemmy.world

    How do you connect the p-trap to this metal drain?

    The connections under my sink have a flexible tube that I'd like to replace with rigid tube. The stub out from the wall doesn't have the nut and threaded connection I've seen before, and they've used what I think is called a no-hub connector.

    Would I use the no-hub connector on the rigid tube or do I sweat something like this on? https://www.brasscraft.com/product/1-12-in-o-d-tube-x-1-12-in-fip-3/ Or is there some other way?

    I've soldered the narrower water supply lines, but nothing this large. Is there anything to consider other than heating it longer?

    The stub out has corroded on the bottom and there's a thin crack that the no-hub fitting covers, so there isn't a leak now, but I don't know if that will be covered if I sweat on a connector. Is there a way to deal with that crack?

    As some extra info, I think that some stubs are threaded into the vertical pipe. This isn't threaded in and doesn't look like it can be removed without opening the wall and replacing it.

    What's this Bug? @lemmy.ml
    Kethal @lemmy.world

    Is this a termite?

    This is from Illinois. I think maybe it's a spider wasp, but I don't have any idea what I'm talking about, so I worry that it's a termite.